The label colors are more subdued than the TM-2025: beige and black. You will need to purchase a shunt separately. TM-2025 RV version is a little less wide than the TM-2025A and has surface mounted enclosure. Bogart Engineering TriMetric 2030 TM-2030-RV-F > 12/24/48 Volt Battery System Monitor The recommended fuse holder and 1 Amp fuse are now included. Flush mount or use wiremold box to mount. The positive lead to the TriMetric should be fused with a 1-amp fuse. Allows for a maximum battery bank size of 2500 amp-hours. Ive used it monitor the charge and current load of the battery bank in my R. The 1000A/100mV shunt has the same resistance as the 500A/50mV shunt and may be used interchangeably. Here is a close up look at my TriMetric Battery Monitor from Bogart Engineering. Use a 1000-amp 100mV shunt for systems with stacked XW inverters or where continuous current is over 300 amps. Bogart Engineering TriMetric TM-2025-RV Battery System Monitor. Use the 500-amp shunt if you have a 12V inverter larger than 800 watts or a 24V inverter larger than 1600 watts. The TriMetric can be located hundreds of feet away from batteries using inexpensive 4-conductor twisted-pair meter wire. It also records min and max voltage, days since batteries were last charged, days since equalized, and total lifetime amp-hours withdrawn from the batteries. Another LED flashes when batteries should be recharged, equalized, and during low battery voltage. Amp-hours can be displayed in actual amp-hour numbers or as "% full." An LED lights when the battery is charging and flashes when the battery has been fully charged. It reads volts, amps and amp-hours on an LED display. This updated version of the 2025 amp-hour meter operates on 12, 24 or 48 volts.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |